First the driver's glovebox comes out, to make it easier to see when the cable's regreased enough.
The glovebox comes out by first opening it, then squeezing the arms on either side inwards...
Hanging on it's hinges, the glovebox pulls straight out.
A few newspapers in the driver's footwell soak up any excess grease later on.
All the tools to start: two 10mm open spanners, a cable greaser tool, a can of spray grease, and a measuring tape.
Now we can make a start!
This is cool. The preparations is quite very detailed. And I can see that it's good.
ReplyDelete